- According to Customer’s Requests
- Size from 0.5 to 2 cubic meter
- 1 Unit(Min Order)
- 10-35 days
- We usually use L/C, Bank Transfer, Cash Payment at Manymay Retail Market
- Garbage Recycling
Mild steel , in Ghana we usually use Q235, which is similar to grade 250 in Australia, we can also use Q345 which is similar to grade 350 in Australia
Size sizes from 1.5 cubic meter to 14 cubic meter
Thickness of plates used 3mm M/S plate for sides and 4mm M/S for floor. Thicker plates are available based on your requirements.
Other specifications 1). RHS 100*50*4 are used for top rails, and top edge of plate continuous welded to RHS
2). one piece forged lifting lugs(39mm)
3). 8mm or 10mm flat bar welded on the sides.
4). Crossmembers under floor.
5). One barrow door on the end
6). Four drain holes in floor close to four corner
7). Fully welded inside and outside
Options 1) Casters
3) Lifting eyes on top
4) Bottom Channels
Painting We will paint each bin you order in your company colours, enhancing your company image with great looking bins.
Two times of primer + two times of top coat
Primer : zinc-based epoxy (Grey)
Top coat : Urethane (Any color)
All kinds of front load bins / Rear load bins can be designed and manufactured here in Manymay Manufactories. Usually standard sizes like 1.5 cubic meter, 3 cubic meter and 4.5 cubic meter can be recommended, besides customized bins can also be achieved according to your designs or requirements.
Normally we use Q235 or Q345 as the materials to build the bins, but if you have special requirements on higher grade of steel, we can also source for you.
Regarding the surface treatment, we can paint the bins in your color or in H.D.G. In addition, extra steel lids and casters can also be provided here, we welcome you to contact us for more information.